CSQ-35T 3.5 Ton 2WD Rough Terrain Diesel Forklift
The CSTAR CSQ-35T is a 3.5 ton 2WD rough terrain diesel forklift with a rated lifting load of 3 500 kg à un centre de charge de 500 mm. The listed configuration uses a Xinchai A495BPG diesel engine, hydraulic torque-converter transmission and pneumatic tires.
Its 1,660 mm overall width and 2,930 mm minimum turning radius are the main dimensions to check against gates, loading areas and turning space. The specification also lists ground clearance at two different points on the truck, which is important when checking uneven travel routes.
Key Specifications
- Rated capacity: 3 500 kg à un centre de charge de 500 mm
- Drive configuration: 2WD
- Standard lift height: 3 000 mm
- Engine: Xinchai A495BPG, China II
- Rated engine power: 36.8 kW at 2,500 r/min
- Ground clearance: 220 mm at the mast; 350 mm at mid-wheelbase
CSQ-35T Technical Specifications
| Paramètre | Unité | Value |
|---|---|---|
| General Characteristics | ||
| Modèle | — | CSQ-35T |
| Power type | — | Diesel |
| Drive configuration | — | 2WD |
| Charge de levage nominale | kg | 3,500 |
| Distance du centre de charge | mm | 500 |
| Standard lifting height | mm | 3,000 |
| Mast tilt, forward / rearward | ° | 8 / 12 |
| Fork overhang | mm | 590 |
| Empattement | mm | 1,850 |
| Track width, front / rear | mm | 1,300 / 1,205 |
| Performance and Brakes | ||
| Service brake | — | Hydraulic, pedal-operated |
| Frein de stationnement | — | Mechanical, manually operated |
| Lifting speed, full load | mm/s | 420 |
| Lowering speed, full load | mm/s | < 600 |
| Lowering speed, no load | mm/s | > 300 |
| Driving speed, no load | km/h | 22 |
| Maximum gradeability, full load | % | 16 |
| Engine, Electrical System and Transmission | ||
| Engine model / listed emissions designation | — | Xinchai A495BPG / China II |
| Rated engine power / speed | kW / r/min | 36.8 / 2,500 |
| Rated engine torque / speed | N·m / r/min | 185 / 1,800–2,000 |
| Engine displacement | L | 2.85 |
| Battery voltage | V | 12 |
| Capacité de la batterie | Ah | 80 |
| Transmission type | — | Hydraulic torque converter |
| Gears, forward / reverse | — | 1 / 1 |
| Pneus | ||
| Tire type | — | Pneumatique |
| Front tire size | — | 14-17,5-16PR |
| Rear tire size | — | 10-16.5-12PR |
| Weight, Dimensions and Forks | ||
| Total weight | kg | 4,950 |
| Fork mounting class | — | IIIB |
| Fork dimensions, thickness × width × length | mm | 50 × 122 × 1,070 |
| Overall length, without forks | mm | 3,100 |
| Overall width | mm | 1,660 |
| Overall height, mast extended | mm | 4,350 |
| Overall height, mast lowered | mm | 2,185 |
| Overhead guard height | mm | 2,300 |
| Minimum turning radius | mm | 2,930 |
| Minimum ground clearance, at mast | mm | 220 |
| Minimum ground clearance, at mid-wheelbase | mm | 350 |
Specifications refer to the configuration shown above. Confirm the final mast, attachments and destination-market engine configuration in the quotation. The listed 16% full-load gradeability is a specification value, not a universal operating-slope limit.
2WD Rough-Terrain Configuration
The CSQ-35T uses a two-wheel-drive layout. For outdoor work, the drive configuration should be considered together with the route surface, changes in level and the amount of traction required at loading and turning points.
Its 1,850 mm wheelbase, 1,660 mm overall width and 2,930 mm minimum turning radius are useful reference points when checking gates, loading positions and turning areas before purchase.
Ground Clearance and Tire Configuration
The supplied tire sizes are 14-17.5-16PR at the front et 10-16.5-12PR at the rear, both pneumatic.
Ground clearance is specified at two locations: 220 mm at the mast et 350 mm at mid-wheelbase. The 350 mm figure should not be treated as the minimum clearance beneath the whole truck. Both measurements matter when checking ramps, surface transitions or obstacles along the route.
Forks, Mast and Access Dimensions
The standard fork specification is 50 × 122 × 1,070 mm with a Class IIIB fork mounting. Fork length and section should be checked against pallet openings, load length and the required load support.
The lowered mast height is 2,185 mm, while the overhead guard height is 2,300 mm. For doorways and covered loading areas, the overhead guard is therefore the higher fixed dimension to check rather than relying only on the lowered mast height.
Overall length without forks is 3,100 mm and the listed total weight is 4,950 kg. For shipping, confirm the final machine configuration, packing dimensions and whether any components will be removed before loading.
Request a CSQ-35T Quotation
Send CSTAR your load weight and dimensions, required lifting height, route photos, doorway clearances and destination country. Include any fork or attachment requirements so the quotation can be based on the required configuration.
