The CSTAR CSHP-YJ30 3 ton full-electric pallet truck combines powered travel and lifting with a large solid-rubber drive wheel. The 300 × 100 mm wheel format distinguishes it from the compact polyurethane-wheel indoor models.

The supplied description also identifies an integrated controller arrangement and sealed gear transmission, making both route conditions and drivetrain configuration relevant to selection.

CSHP-YJ30 Specifications

Parameter	Specification
Model	CSHP-YJ30
Rated Load Capacity	3,000 kg
Operation Type	Full electric
Load Center Distance	500 mm
Drive Wheel Type	Rubber
Drive Wheel Size	Φ300 × 100 mm
Load Wheel Size	Φ80 × 70 mm
Minimum Fork Height	85 mm
Maximum Fork Height	200 mm
Inner Width Between Forks	230 / 365 mm
Outer Width Between Forks	550 / 685 mm
Fork Length	1,150 mm
Single Fork Width	160 mm
Fork Thickness	40 mm
Overall Length	1,750 mm
Overall Width	685 mm
Overall Height with Handle	1,280 mm
Overall Height without Handle	680 mm
Minimum Turning Radius	1,550 mm
Maximum Travel Speed — Laden/Unladen	4 / 4.5 km/h
Gradeability — Laden/Unladen	7% / 16%
Battery	48V / 20A
Drive Motor Power	1,500 W
Lifting Motor Power	1,200 W
Overall Weight	195 kg
Lifting Speed — Laden/Unladen	2.2 / 3.3 cm/s

Large Drive Wheel for Outdoor Transitions

The larger rubber drive wheel is intended for routes that include yard paving, joints, and uneven transitions. It does not remove the need to check slope, potholes, loose material, drainage channels, and the 85 mm minimum fork height along the actual route.

With a 1,550 mm turning radius and 685 mm overall width, maneuvering space must still be measured at gates, corners, and loading points.

Controller and Transmission as a Service Package

For maintenance planning, confirm the controller, sealed transmission, motor ratings, and local parts support together. These components should be identified on the final order rather than described only as general product advantages.