El CSTAR CSHP-XJ30 3 ton full-electric pallet truck combines a compact polyurethane drive wheel with powered travel and lifting. The drivetrain description highlights an integrated controller and fully sealed gear transmission.
This 165 kg, 685 mm-wide configuration is intended for flat-floor warehouse routes carrying loads up to the stated 3,000 kg rating.
CSHP-XJ30 Specifications
| Parámetro | Especificación |
|---|---|
| Modelo | CSHP-XJ30 |
| Capacidad de carga nominal | 3.000 kg |
| Tipo de operación | Totalmente eléctrico |
| Distancia del centro de carga | 500 mm |
| Tipo de rueda motriz | PU |
| Tamaño de la rueda motriz | ^175×55 mm |
| Tamaño de la rueda de carga | <80×70 mm |
| Altura mínima de la horquilla | 85 mm |
| Altura máxima de la horquilla | 200 mm |
| Ancho interior entre horquillas | 230 / 365 mm |
| Ancho exterior entre horquillas | 550 / 685 mm |
| Longitud de la horquilla | 1.150 mm |
| Ancho de horquilla única | 160 mm |
| Espesor de la horquilla | 40 mm |
| Longitud total | 1.730 mm |
| Ancho total | 685 mm |
| Altura total con mango | 1.260 mm |
| Altura total sin mango | 680 mm |
| Radio mínimo de giro | 1.550 mm |
| Velocidad máxima de desplazamiento « Cargado/Descargado | 4 / 4,5 km/h |
| Gradabilidad « Cargado/Descargado | 7% / 16% |
| Batería | 48V/20A |
| Impulso de potencia del motor | 1.500 W |
| Potencia del motor de elevación | 1.200 W |
| Peso total | 165 kg |
| Velocidad de elevación « Cargado/Descargado | 2,2 / 3,3 cm/s |
Define the Drivetrain for Service Planning
The controller, isolation circuit, sealed transmission, drive motor, and lift motor form one service package. Confirm component makes, diagnostic support, spare-parts availability, and warranty coverage for the destination market before finalizing the order.
This information is more useful for lifecycle planning than repeating general claims about reliability or reduced maintenance.
Check Pallet Geometry Before Capacity
The truck offers 550 mm and 685 mm outer fork widths, an 85 mm minimum fork height, and 1,150 mm fork length. A 3,000 kg rating is only useful when the forks enter the pallet correctly and the load center remains within the specified 500 mm.
Request a Quote for the CSHP-XJ30
Send the load weight and center, pallet opening, floor condition, travel distance, service requirements, charging arrangement, and destination country.
