The CSTAR Machinery CSJ-LB600 crawler lawn mower combines a 600mm cutting width with a listed machine weight of 120kg. Its 1,200 × 800 × 540mm body is intended for mowing routes where transport size, access and ground conditions matter as much as cutting width.
The listed configuration uses a 9.5hp power unit, a 24V 40Ah electrical system and a self-generating system for continued operation. A 20–150mm cutting-height range allows the mowing setup to be matched to different vegetation and finish requirements.
A 600mm Cutting Path in a 120kg Crawler Platform
The CSJ-LB600 occupies a useful middle position for buyers who need more cutting width than a 500mm machine but do not need the size and transport weight of the 800–1,000mm models. Its 600mm deck increases the area covered per pass, while the 800mm overall width remains the dimension to check against gates, paths and loading equipment.
The specification lists mowing efficiency of 3,000m²/h and travel speed of 5km/h. Those figures should be treated as configuration references rather than guaranteed site output: vegetation density, slope, turning frequency, overlap and cutting height all affect the area completed in practice.
Where the CSJ-LB600 Fits
This model is worth considering for orchards, solar farms, landscaped grounds and roadside or estate maintenance where a crawler undercarriage and compact transport footprint are useful. The listed 30° climbing angle does not by itself confirm suitability for every slope. Surface firmness, cross-slope travel, wet grass, obstacles and vegetation height must also be assessed.
Before ordering, measure the narrowest access point and identify the steepest working section. Also state whether the mower will work across a slope or directly uphill and downhill, because those routes place different demands on traction and stability.
CSJ-LB600 Specifications
| Parameter | Specification |
|---|---|
| Model | CSJ-LB600 |
| Overall Dimensions | 1,200 × 800 × 540mm |
| Packing Dimensions | 1,250 × 850 × 710mm |
| Machine Weight | 120kg |
| Packing Weight | 180kg |
| Cutting Width | 600mm |
| Cutting Height | 20–150mm |
| Travel Speed | 5km/h |
| Climbing Angle | 30° |
| Power | 9.5hp |
| Fuel Tank Capacity | 1.2L |
| Fuel Consumption | 1.2L/h |
| Engine Oil Capacity | 0.6L |
| Mowing Efficiency | 3,000m²/h |
| Voltage / Battery Capacity | 24V / 40Ah |
| Controller | Integrated circuit board |
| Travel System | Enhanced travel motor |
| Power-Supply Feature | Self-generating system for continued operation |
Specifications describe the listed configuration. Final engine, electrical system and other supplied details should be confirmed in the quotation and order documents.
CSJ-LB600 FAQ
Is the cutting width the same as the machine width?
No. The cutting width is 600mm, while the complete machine is listed as 800mm wide. Use the overall machine width, plus working clearance, when checking gates and access routes.
Will the mower always cover 3,000m² in one hour?
No. The specification lists 3,000m²/h, but actual output changes with vegetation, overlap, turning, slope, obstacles and the selected cutting height.
Does the 30° figure apply to every mowing slope?
No. It is the listed climbing angle for the machine. Actual site suitability depends on surface grip, slope direction, wet conditions, obstacles and operating procedures.
What to Include in Your Enquiry
- Site photographs and the grass, weeds or brush to be cut
- Working-area size and expected daily operating hours
- Maximum slope, travel direction and ground condition
- Narrowest gate, path and transport-vehicle dimensions
- Required cutting-height range and finish
- Destination country, quantity and spare-parts requirements
Request a CSJ-LB600 Quotation
Send CSTAR Machinery your terrain, vegetation, slope, access dimensions and operating-hour requirements.
