The CSTAR CSHP-Z20 2 ton stand-on electric pallet truck combines a riding platform with powered travel and lifting. It uses a 1.5 kW drive motor and 2.2 kW hydraulic lifting motor for the lower-capacity Z-series configuration.
The supplied fork arrangement is 1,200 × 160 × 50 mm with a 685 mm outside width and an 85–200 mm lifting range.
CSHP-Z20 Specifications
| Parameter | Specification |
|---|---|
| Model | CSHP-Z20 |
| Load Capacity | 2,000 kg |
| Operation Type | Full Electric Stand-on |
| Vehicle Weight | 420 kg |
| Minimum Fork Height | 85 mm |
| Fork Lifting Height | 200 mm |
| Fork Dimensions | 1,200 × 160 × 50 mm |
| Drive Motor Power | 48V / 1,500 W |
| Hydraulic Lifting Motor Power | 48V / 2,200 W |
| Outer Width Between Forks | 685 mm |
| Gradeability (Laden/Unladen) | 10%/15% |
The Lower-Capacity Stand-On Configuration
The Z20 suits repeated internal travel where verified pallet loads remain within 2,000 kg and the operator benefits from riding rather than walking the route. The CSHP-Z30 page contains the fuller stand-on route and safety selection discussion for loads that require the 3,000 kg version.
Battery specification, travel speed, turning radius, and complete chassis dimensions are not included in the short table and should be defined in the quotation.
Request a Quote for the CSHP-Z20
Send the load weight, pallet dimensions, route length, aisle layout, required operating time, battery preference, and destination country.
