The CSTAR CSHP-H20 2 ton hand pallet truck is a manual warehouse truck with 550 mm and 685 mm fork-width configurations. Standard wheel options include nylon, polyurethane, and aluminum-core rubber.
It is positioned for routine short-distance pallet movement where a 2,000 kg rating is sufficient and simple manual operation is preferred.
CSHP-H20 Configurations
| Rated Load Capacity | Fork Outside Width | Wheel Type | Fork Length | Minimum Height | Maximum Height |
|---|---|---|---|---|---|
| 2,000 kg | 550 mm | Nylon | 1,100 mm | 85 mm | 195 mm |
| 2,000 kg | 550 mm | Polyurethane | 1,100 mm | 85 mm | 195 mm |
| 2,000 kg | 550 mm | Aluminum-core rubber | 1,100 mm | 85 mm | 195 mm |
| 2,000 kg | 685 mm | Nylon | 1,200 mm | 85 mm | 195 mm |
| 2,000 kg | 685 mm | Polyurethane | 1,200 mm | 85 mm | 195 mm |
| 2,000 kg | 685 mm | Aluminum-core rubber | 1,200 mm | 85 mm | 195 mm |
| 2,000 kg | 550 mm low-profile | Nylon | 1,100 mm | 85 mm | 195 mm |
| 2,000 kg | 550 mm low-profile | Nylon | 1,200 mm | 85 mm | 195 mm |
Match the Fork Opening to the Pallet
The 550 mm configuration uses 1,100 mm forks, while the 685 mm configuration uses 1,200 mm forks. Check pallet entry width, board spacing, fork-pocket height, and load overhang before choosing between them.
When the H30 Becomes the Better Manual Option
The H30 page provides the expanded selection for 3,000 kg loads and extended forks up to 2,000 mm. The H20 remains the shorter, lower-capacity choice for standard pallet work; any low-profile requirement should be stated with an exact pallet-entry height.
Request a Quote for the CSHP-H20
Send the load weight, pallet opening, required fork length and width, minimum entry height, floor condition, and destination country.
