El CSTAR CSHP-Z30 3 ton stand-on electric pallet truck is designed for powered pallet travel with the operator riding on the truck. Guardrails, steering speed reduction, and reverse braking are listed as part of the operating configuration.
A 2 kW drive motor and 3 kW hydraulic lifting motor support the 3,000 kg version, while 1,200 mm forks and a 685 mm outside fork width define the supplied pallet interface.
CSHP-Z30 Specifications
| Parámetro | Especificación |
|---|---|
| Modelo | CSHP-Z30 |
| Capacidad de carga | 3.000 kg |
| Tipo de operación | Independiente totalmente eléctrico |
| Peso del vehículo | 420 kg |
| Altura mínima de la horquilla | 85 mm |
| Altura de elevación de la horquilla | 200 mm |
| Dimensiones de la horquilla | 1.200 × 160 × 50 mm |
| Impulso de potencia del motor | 48V / 2,000 W |
| Potencia del motor de elevación hidráulica | 48V / 3,000 W |
| Ancho exterior entre horquillas | 685 mm |
| Capacidad de calificación (cargado/sin carga) | 10%/15% |
Stand-On Operation for Repeated Internal Routes
A riding platform becomes relevant when the same operator repeatedly travels between storage, production, and loading points. Route length, intersection visibility, pedestrian traffic, stopping frequency, and protected operating space should be assessed before choosing stand-on operation over a walkie model.
The listed 420 kg vehicle weight also needs to be included when checking floor and lift capacity.
Use the 3 Ton Version Only Where the Load Requires It
The Z30 is the higher-capacity version with 2/3 kW drive and lifting motors. For sites limited to 2,000 kg, the Z20 uses lower-output motors on the same listed fork layout; the exact battery and chassis dimensions should be confirmed for either quotation.
Request a Quote for the CSHP-Z30
Send the load weight, pallet dimensions, route length, aisle and intersection layout, gradients, required safety equipment, and destination country.
