The CSAF-15 1.5 ton electric forklift uses a 60V lead-acid battery system and provides a 1500kg lifting capacity with a standard 3000mm lift height.
The machine measures 2250mm long excluding the forks and uses a 3000W AC travel motor with a 2500W hydraulic lifting motor.
More Than a Capacity Increase From the CSAF-10
The change from the CSAF-10 to the CSAF-15 is not limited to an extra 500kg of lifting capacity. The CSAF-15 moves from a mechanical brake to a hand brake plus hydraulic brake, changes from a single lifting cylinder to reinforced dual cylinders, and uses larger 650-10 front and 500-8 rear tires.
Its listed charging time also drops from 8–10 hours on the CSAF-10 to 4–6 hours, while continuous working time is listed at 6–8 hours. For buyers comparing these two models, the charging schedule and chassis configuration are therefore as relevant as the additional capacity.
CSAF-15 Specifications
| Category | Parameter | Specification |
|---|---|---|
| Technical Parameters | Max. Lifting Capacity | 1500kg |
| Length | 2250mm (excluding fork length) | |
| Width | 1200mm | |
| Height | 2150mm | |
| Total Vehicle Weight | 2500kg | |
| Lifting Height | 3000mm | |
| Body Material | New stamped steel body | |
| Electrical System | Travel Motor | 3000W AC travel motor |
| Voltage | 60V | |
| Controller | Anti-slope high-power controller | |
| Battery | 5 pieces of 70Ah maintenance-free lead-acid batteries | |
| Lights & Signals | Headlights, left/right turn signals, brake lights, driving lights, instrument panel, horn, etc. | |
| Chassis System | Drive Axle | Yuanbao axle |
| Tires | Front 650-10, Rear 500-8, C-grade solid tires | |
| Steering Axle | Heavy-duty forklift-specific rear axle | |
| Brake Type | Hand brake + hydraulic brake | |
| Lifting Cylinder | Reinforced sealed dual cylinders | |
| Other Configurations | Fork Length | 1220mm extra-thick forged forks |
| Hydraulic Lifting Motor | 2500W AC hydraulic lifting motor | |
| Mast Material | C-section steel mast | |
| Steering Type | Hydraulic power steering | |
| Turning Radius | 90°in-situ steering | |
| Charging Time | 4-6 hours | |
| Continuous Working Time | 6-8 hours | |
| Climbing Angle | 15° |
Send us the normal pallet weight, lift height, daily operating hours and destination country.
