The CSTAR CSGL-V1000 Compact Track Loader has a 500 kg rated load, a 650 kg maximum load, and a 0.19 m³ bucket.
The machine has an operating weight of 1,892 kg, a listed vehicle width of 960 mm, and Yanmar or Kubota engine options.
CSGL-V1000 Technical Specifications
CSGL-V1000 Technical Specifications
| Category | Parameter | Specification |
|---|---|---|
| General | Model | CSTAR CSGL-V1000 |
| Performance | Operating Weight | 1,892 kg |
| Performance | Bucket Capacity | 0.19 m³ |
| Performance | Climbing Ability | 25° |
| Performance | Maximum Breakout Force | 4.5 kN |
| Performance | Rated Load | 500 kg |
| Performance | Maximum Load | 650 kg |
| Performance | Travel Speed | 0–6 km/h |
| Performance | Vehicle Width | 960 mm |
| Hydraulic System | Rated Pressure | 17–20 MPa |
| Bucket | Bucket Width | 1,240 mm |
| Working Range | Maximum Loading Height | 2,102 mm |
| Working Range | Maximum Dumping Height | 1,522 mm |
| Working Range | Maximum Operating Height | 2,794 mm |
| Working Range | Height to Bucket Pin | 2,140 mm |
| Working Range | Bucket Dump Angle at Maximum Height | 63° |
| Dimensions | Minimum Height | 1,548 mm |
| Chassis | Departure Angle | 29° |
| Chassis | Ground Clearance | 200 mm |
| Working Range | Dumping Distance | 498 mm |
| Track | Track Contact Length | 1,080 mm |
| Dimensions | Overall Dimensions | 2691 × 1240 × 1548 mm |
| Dimensions | Length Including Bucket | 2,691 mm |
| Dimensions | Length Excluding Bucket | 1,981 mm |
| Track | Track Specification | 230 × 72 × 45 |
| Engine | Engine Brand Options | Yanmar / Kubota |
| Engine | Engine Model Options | 3TNV80 / D1105 |
| Engine | Rated Power | 15.2 (17.8) / 17.1 kW |
| Engine | Cylinder | 3 |
| Engine | Intake Method | Naturally Aspirated |
| Engine | Fuel Tank Capacity | 40 L |
Check Vehicle Width and Bucket Width Separately
The listed vehicle width is 960 mm, while the bucket width is
1,240 mm. If access width is critical, check the complete machine
configuration rather than using the 960 mm vehicle width alone.
500 kg Rated Load vs. 650 kg Maximum Load
For normal machine comparison, use the 500 kg rated load as the
main working figure. The listed 650 kg maximum load should not be
treated as the normal rated operating capacity.
Common Ordering Questions
Will the CSGL-V1000 fit through a 1-meter-wide access?
The listed vehicle width is 960 mm, but the bucket width is 1,240 mm.
Check the installed working width and the narrowest point on the access route
before ordering.
Which engine options are listed for the CSGL-V1000?
The specification lists Yanmar and Kubota as engine brand options,
with 3TNV80 and D1105 listed as engine model options.
Include the destination country and preferred engine configuration when requesting
a quotation.
Send the material type, typical load, access width, required dumping height,
working surface, preferred engine option and destination country.
