The CSHF-H20 2 ton all-terrain electric stacker is designed for outdoor material handling on dirt roads, gravel surfaces, uneven pavement, factory yards, construction sites, and open storage areas. Its widened off-road wheels, reinforced chassis, and shock-absorbing structure are intended for work beyond smooth warehouse floors.
The CSHF-H20 is rated for 2,000 kg and provides a 2,000 mm lifting height. It uses a 48V 2 kW drive motor and a 48V 3 kW lifting motor, with an overall length of 2,030 mm without the pedal and 2,405 mm with the pedal.
What the CSHF-H20 Adds Over the CSHF-H15
The H20 adds 500 kg of rated capacity over the H15 while retaining the same listed overall length, lifting height, fork size, drive and load wheel sizes, and 1,200 mm inner outrigger width.
Motor output increases from 1.5 kW to 2 kW for travel and from 2.2 kW to 3 kW for lifting. These increases make the H20 the relevant choice when the application genuinely requires loads above the practical range of the 1.5-ton model.
Do not select the higher-capacity model from the rated load alone. Outdoor performance depends on gradient, ground condition, load center, tire contact, battery configuration, braking, and travel distance. Confirm the missing site-critical specifications before ordering.
CSHF-H20 Specifications
| Parameter | Specification |
|---|---|
| Model | CSHF-H20 |
| Rated Load | 2,000 kg |
| Operation Type | Electric lifting |
| Overall Length — Without/With Pedal | 2,030 / 2,405 mm |
| Drive Motor Power | 48V / 2 kW |
| Lifting Motor Power | 48V / 3 kW |
| Lifting Height | 2,000 mm |
| Fork Size | 1,150 × 180 × 50 mm |
| Drive Wheel Size | Φ300×100 mm |
| Inner Width of Outriggers | 1,200 mm |
| Load Wheel Size | Φ300×80 mm |
Request a Quote for the CSHF-H20
Share the maximum load, ground surface, gradient, travel distance, lifting height, pallet dimensions, and daily operating hours. We will verify whether the CSHF-H20 configuration is suitable for the site.
