The CSAE-30 3 ton electric forklift is the highest-capacity model in the CSAE electric forklift range covered here. It is designed for warehouses, manufacturing plants, and logistics operations that need to handle loads of up to 3,000 kg at a lifting height of 3,000 mm.
A 72V electrical system, 7,500W AC travel motor, and 5,000W hydraulic lifting motor distinguish the CSAE-30 from the lower-capacity CSAE models. The additional power and vehicle mass are intended for operations that genuinely need 3-ton load capability rather than a general-purpose capacity upgrade.
When to Step Up from the CSAE-25 to the CSAE-30
Compared with the CSAE-25, the CSAE-30 adds 500 kg of rated lifting capacity and increases travel motor output from 5,000W to 7,500W. Based on the listed specifications, it is also 150 mm longer and 600 kg heavier. Those differences matter when evaluating turning space, floor loading, ramps, transport arrangements, and total cost.
The upgrade is most relevant when normal loads exceed 2,500 kg or when the application requires additional capacity margin after accounting for load center, attachments, and lifting height. If routine loads remain comfortably below 2,500 kg, the CSAE-25 may be the more space- and budget-efficient choice.
Before selecting the CSAE-30, confirm that the site can accommodate its listed 2,600 mm chassis length excluding forks, 1,200 mm width, 2,150 mm height, and 4,000 kg vehicle weight. The final decision should be checked against the actual pallet size, aisle geometry, floor capacity, gradient, operating hours, and approved load chart.
CSAE-30 Specifications
| Parameter | Specification |
|---|---|
| Model | CSAE-30 |
| Maximum Lifting Capacity | 3,000 kg |
| Length | 2,600 mm (excluding fork length) |
| Width | 1,200 mm |
| Height | 2,150 mm |
| Total Vehicle Weight | 4,000 kg |
| Lifting Height | 3,000 mm |
| Body Material | New stamped steel body |
| Travel Motor | 7,500W AC travel motor |
| Hydraulic Lifting Motor | 5,000W hydraulic lifting motor |
| Voltage | 72V |
| Controller | Anti-slope high-power controller |
| Battery | 10 × 70Ah maintenance-free lead-acid batteries |
| Lights & Signals | Headlights, left and right turn signals, brake lights, driving lights, instrument panel, horn, etc. |
| Drive Axle | Cast-steel 310 axle |
| Tires | Front 650-10; rear C-grade solid tire |
| Steering Axle | Heavy-duty forklift-specific rear axle |
| Brake Type | Hand brake and hydraulic brake |
| Lifting Cylinder | Dual cylinders with reinforced seals |
| Fork Length | 1,220 mm extra-thick forged forks |
| Mast Material | Widened special steel mast |
| Steering Type | Hydraulic power steering |
| Steering Capability | 90° in-situ steering |
| Charging Time | 4–6 hours |
| Continuous Working Time | 6–8 hours |
| Gradeability | 15° |
Request a Quote for the CSAE-30
Share your typical and maximum load weights, load center, pallet dimensions, required lifting height, aisle width, daily operating hours, and site gradient. We will help confirm whether the CSAE-30 or CSAE-25 is the better fit.
