The CSAH-20 2 ton electric forklift is designed for warehouse storage, production support, and logistics operations handling loads of up to 2,000 kg. It provides more capacity and motor output than the CSAH-15 while retaining a 1,200 mm overall width.
The CSAH-20 uses a 60V electrical system with a 4 kW AC travel motor and a 4 kW hydraulic lifting motor. Its chassis measures 2,450 mm long excluding the forks, the standard lifting height is 3,000 mm, and the listed vehicle weight is 2,700 kg.
When to Move from the CSAH-15 to the CSAH-20
The CSAH-20 adds 500 kg of rated capacity over the CSAH-15. Travel motor output increases from 3 kW to 4 kW, and hydraulic lifting motor output rises from 2.5 kW to 4 kW. Both models use the same 60V system, five 70Ah batteries, 1,200 mm width, 3,000 mm lifting height, and listed 6–8 hour working time.
The additional capacity comes with a 200 mm increase in chassis length, a 50 mm increase in height, and 200 kg more vehicle weight. These differences should be checked against aisle clearance, door height, floor capacity, and transport arrangements rather than selecting on rated load alone.
Choose the CSAH-20 when normal loads exceed the practical range of the 1.5-ton model but remain below 2,000 kg. If loads frequently approach the rated limit, confirm the load center, pallet size, attachments, and required lift height before finalizing the configuration.
CSAH-20 Specifications
| Parameter | Specification |
|---|---|
| Model | CSAH-20 |
| Rated Lifting Capacity | 2,000 kg |
| Length | 2,450 mm (excluding forks) |
| Width | 1,200 mm |
| Height | 2,200 mm |
| Vehicle Weight | 2,700 kg |
| Lifting Height | 3,000 mm |
| Body Material | New stamped body |
| Travel Motor | 4 kW AC travel motor |
| Voltage | 60V |
| Controller | Anti-slope high-power controller |
| Battery | 5 × 70Ah maintenance-free lead-acid batteries |
| Lights & Signals | Headlight, left and right turn signals, brake light, driving light, instrument panel, electric horn, etc. |
| Drive Axle | Cast-steel suspended 220 axle |
| Tires | Front 650-10; rear 500-8; Grade C solid tires |
| Steering Axle | Reinforced heavy-duty forklift-specific rear axle |
| Braking System | Hand brake and hydraulic brake |
| Lifting Cylinder | Dual cylinders with enhanced seals |
| Fork Length | 1,220 mm ultra-thick forged forks |
| Hydraulic Lifting Motor | 4 kW AC hydraulic motor |
| Mast Material | C-channel steel mast |
| Steering Mode | Hydraulic power steering |
| Steering Capability | 90° in-place turning |
| Charging Time | 4–6 hours |
| Continuous Working Time | 6–8 hours |
| Gradeability | 15° |
Note: Body dimensions, lifting height, and other configurations can be customized according to customer requirements. Specifications are for reference and are subject to the final configuration.
Request a Quote for the CSAH-20
Send us your normal and maximum load weights, pallet dimensions, lifting height, aisle width, operating hours, and site conditions. We will help confirm whether the CSAH-20 or a neighboring capacity model is the better fit.
