The CSQD-20 2.0 Ton Diesel Forklift Truck is designed for pallet handling, loading, unloading and material transport in warehouses, factories and outdoor yards. It combines a 2,000 kg rated capacity with pneumatic tires, hydraulic transmission and a compact 1,170 mm overall width.
Its rated capacity applies at a 500 mm load center. Actual residual capacity may change when handling long loads, using attachments or operating at increased lift heights. Confirm your load dimensions and working conditions before ordering.
CSQD-20 Technical Specifications
| Category | Parameter | Specification |
|---|---|---|
| General | Model | CSQD-20 |
| General | Power Type | Diesel |
| General | Driving Mode | Seated |
| Capacity | Rated Lifting Capacity | 2,000 kg |
| Capacity | Load Center | 500 mm |
| Dimensions | Overall Length, Including Forks | 3,590 mm |
| Dimensions | Overall Length, Excluding Forks | 2,520 mm |
| Dimensions | Overall Width | 1,170 mm |
| Dimensions | Mast Height, Lowered | 2,100 mm |
| Dimensions | Overhead Guard Height | 2,110 mm |
| Chassis | Wheelbase | 1,600 mm |
| Chassis | Front Overhang | 460 mm |
| Chassis | Rear Overhang | 410 mm |
| Chassis | Minimum Ground Clearance | 110 mm |
| Lifting | Maximum Lifting Height | 3,000 mm |
| Lifting | Free Lift Height | 150 mm |
| Lifting | Mast Tilt, Forward/Backward | 6° / 12° |
| Maneuverability | Minimum Outside Turning Radius | 2,300 mm |
| Performance | Maximum Lifting Speed, No Load | 530 mm/s |
| Performance | Maximum Lifting Speed, Full Load | 500 mm/s |
| Performance | Maximum Travel Speed, No Load | 20 km/h |
| Performance | Maximum Travel Speed, Full Load | 18 km/h |
| Performance | Maximum Gradeability, Full Load | 20% |
| Weight | Service Weight | 3,400 kg |
| Tires | Number of Tires, Front/Rear | 2 / 2 |
| Tires | Tire Type | Pneumatic |
| Tires | Front Tire Size | 7.00-12, 12PR |
| Tires | Rear Tire Size | 6.00-9, 10PR |
| Brakes | Service Brake | Power-Assisted Pedal Brake |
| Brakes | Parking Brake | Mechanical Hand Brake |
| Electrical | Battery Voltage/Capacity | 12 V / 80 Ah |
| Engine | Engine Options | Quanchai Euro II QC490GP or Xinchai Euro II C490BPG |
| Fuel System | Fuel Tank Capacity | 50 L |
| Transmission | Transmission Type | Hydraulic Shift |
| Controls | Number of Gear Levers | 1 |
A Practical 2 Ton Capacity for Standard Industrial Loads
The CSQD-20 is suited to standard pallets and industrial loads that remain comfortably within its 2,000 kg capacity at a 500 mm load center. Its 1,170 mm width and 2,300 mm turning radius make it a practical choice for general factory, warehouse and yard operations where a larger-capacity truck is unnecessary.
When the CSQD-20 Is the Right Capacity Class
Choose this model when your verified maximum load remains safely below two tonnes and the load center is close to 500 mm. If loads regularly approach the rated limit, have unusual dimensions or require attachments, provide the complete load information so the required residual capacity can be checked.
Compare selection factors in our
diesel forklift buying guide
or view the complete
diesel forklift range.
Common Ordering Questions
Does the 2,000 kg rating apply to every load?
The rating is based on a 500 mm load center. Long or uneven loads, attachments and increased lift heights can reduce the available lifting capacity.
What information should I provide for a CSQD-20 quotation?
Provide the maximum load weight and dimensions, load center, required lift height, working surface, ramp gradient, daily operating hours, engine preference and delivery destination.
Confirm Whether the CSQD-20 Fits Your Application
Send us your load details and operating conditions. We will help verify the appropriate capacity, mast configuration and engine option.
