The CSTAR CSHP-Y20 2 ton full-electric pallet truck brings the Y-series large rubber drive wheel and removable-battery arrangement to the 2,000 kg load class. Its drive and lifting motors are rated at 1.3 kW and 1.2 kW.

This version is intended for routes where outdoor transitions matter but the regular load does not require the 3,000 kg Y30 configuration.

CSHP-Y20 Specifications

Parameter	Specification
Model	CSHP-Y20
Rated Load Capacity	2,000 kg
Load Center Distance	500 mm
Operation Type	Full Electric
Drive Wheel Type	Rubber
Drive Wheel Size	Φ300 × 100 mm
Load Wheel Size	Φ80 × 70 mm
Minimum Fork Height	85 mm
Maximum Fork Height	200 mm
Inner Width Between Forks	230 / 365 mm
Outer Width Between Forks	550 / 685 mm
Fork Length	1,160 mm
Single Fork Width	160 mm
Fork Thickness	40 mm
Overall Length	1,750 mm
Overall Width	685 mm
Overall Height with Handle	1,380 mm
Overall Height without Handle	700 mm
Minimum Turning Radius	1,550 mm
Maximum Travel Speed — Laden/Unladen	4 / 4.5 km/h
Gradeability — Laden/Unladen	7% / 16%
Battery	48V / 20A
Drive Motor Power	1,300 W
Lifting Motor Power	1,200 W
Overall Weight	195 kg
Lifting Speed — Laden/Unladen	2.2 / 3.3 cm/s

Outdoor-Route Capability for the 2 Ton Load Class

The 300 × 100 mm drive wheel, 685 mm body width, and 1,550 mm turning radius define the basic route envelope. Confirm the steepest loaded gradient, surface defects, fork clearance, and turning space before treating the wheel size as sufficient evidence of site suitability.

For heavier loads and the complete removable-battery and route-planning discussion, refer to the CSHP-Y30 product page.