The CSTAR CSGL-S55 Skid Steer Loader carries a 890 kg rated load, uses a 0.4 m³ bucket and provides a 25 kN maximum breakout force.
Its hydraulic system is specified at 55 L/min and 21 MPa, making hydraulic output an important part of S55 attachment selection.
CSGL-S55 Technical Specifications
| Category | Parameter | Specification |
|---|---|---|
| General | Brand / Model | CSTAR CSGL-S55 |
| Performance | Operating Weight | 3,845 kg |
| Performance | Rated Load | 890 kg |
| Performance | Maximum Load | ≥1,780 kg |
| Bucket | Bucket Capacity | 0.4 m³ |
| Bucket | Bucket Width | 1,800 mm (±2%) |
| Performance | Maximum Breakout Force | 25 kN |
| Performance | Climbing Ability | 25° |
| Performance | Travel Speed | 0–12 km/h |
| Hydraulic System | Hydraulic Flow Rate | 55 L/min |
| Hydraulic System | Hydraulic Pressure | 21 MPa |
| Working Range | Maximum Loading Height | 2,846 mm (±5%) |
| Working Range | Maximum Dumping Height | 2,384 mm (±5%) |
| Working Range | Maximum Operating Height | 3,790 mm |
| Working Range | Height to Bucket Pin | 3,020 mm |
| Working Range | Bucket Dump Angle at Maximum Height | 63° |
| Dimensions | Minimum Height | 2,095 mm (±5%) |
| Dimensions | Tail Length | 1,160 mm (±5%) |
| Chassis | Ground Clearance | 185 mm (±2%) |
| Working Range | Dumping Distance | 520 mm (±1%) |
| Chassis | Wheelbase | 1,200 mm |
| Dimensions | Overall Dimensions | 3450 × 1800 × 2095 mm |
| Dimensions | Length Including Bucket | 3,450 mm |
| Dimensions | Length Excluding Bucket | 2,700 mm |
| Tires | Tire Model | 10-10.5 |
| Engine | Engine Brand Options | Yanmar / Cummins |
| Engine | Engine Model Options | 4TNV80 / HFC4DA1-2C3 |
| Engine | Rated Power | 35.5 / 36.8 kW |
| Engine | Cylinder | 4 |
| Engine | Intake Method | Naturally Aspirated |
| Engine | Fuel Tank Capacity | 80 L |
55 L/min Hydraulic Flow for Attachment Matching
The S55 hydraulic system is specified at 55 L/min and 21 MPa. When adding a hydraulic attachment, compare its required flow and pressure with these figures instead of checking mounting dimensions alone.
2,384 mm Maximum Dumping Height
Maximum dumping height is 2,384 mm, with a dumping distance of 520 mm. Both measurements matter when checking whether the bucket can reach into a truck body, hopper or receiving point.
Use 890 kg as the Working Load Reference
The specification lists a 3,845 kg operating weight, 890 kg rated load and ≥1,780 kg maximum load. For routine capacity comparison, the 890 kg rated-load figure is the relevant working reference.
What should I check before ordering a hydraulic attachment for the S55?
Check the attachment’s required hydraulic flow and pressure against the S55 specification of 55 L/min and 21 MPa.
Can the S55 load my truck or hopper?
Compare the receiving point with the S55’s 2,384 mm maximum dumping height and 520 mm dumping distance.
Send the material, typical load, truck or hopper height, required attachment, working surface and destination country.
